Air conditioners are costly investments, and their installation necessitates careful consideration. Installing an air conditioner can be a joyful or stressful experience, but knowing what to expect can make the process go more smoothly. Improper installation may appear comparable at first glance, but it can lead to problems in the future.
4 things to know before AC installation
To avoid potential problems and ensure the proper operation of air conditioners, homeowners must have the necessary information. It is usually recommended to contact an expert for AC installation in Kennesaw GA, so that the process may be simplified.
So, before you go ahead and install a new air conditioner, there are a few things you should know about the process:
-
Size of the AC unit
When putting an air conditioner in your home, you must keep the size in mind. For optimal cooling, you need to purchase the AC with the correct measurement. A large air conditioner will dehumidify the air, whereas a tiny air conditioner will not be capable of cooling the entire space. As a result, it is always necessary to install an air conditioner while keeping space and area in mind
-
Design of the room
One of the parameters to be considered is the room’s design. Experts in air conditioner installation in Marietta, GA are always recommended since they can precisely evaluate a load of a home-based on the square footage, the number of windows, and size. Homeowners will save money on energy costs, and the lifespan of their air conditioner will be extended by installing an AC based on the size of the rooms.
-
Space between wall and AC unit
For adequate airflow, there must be at least 15 cm of open space surrounding the top and sides of an interior AC unit when it is installed. It’s crucial to remember the form of the room when situating yourself. For a better cooling experience, the height of the AC above the floor should be no more than 10 feet. For greater counsel, homeowners should seek experts for AC installation.
-
Feasible distance between indoor and outdoor unit
To achieve greater cooling, a reasonable spacing between indoor and outdoor units must be maintained. The coolant inside the copper tubes between the indoor and outdoor units runs at a low temperature. There is a loss of cooling effect when the refrigerant flows between the units. There is a steady loss of cooling as the coolant traverses this distance.
As a result, it’s critical to maintain a minimum distance between the two units in order to minimize cooling air loss. To minimize loss, keep a 15-meter distance between the outside and indoor units while installing an air conditioner.
To operate at full capacity, air conditioners must be properly placed. Therefore, even if homeowners have complete information about the installation process, they should be guided through the process by an expert. If you are on the lookout for such an expert, Top Tech Mechanical Services is here to help. Contact us at (678) 253-2239 or send us an email at service@toptechmech.com to save money on your AC replacement in Marietta with skilled technicians.
